.. _gotchas:

====================
Gotchas and Pitfalls
====================

.. role:: input(strong)

Introduction
============

SymPy runs under the `Python Programming Language
<https://www.python.org/>`_, so there are some things that may behave
differently than they do in other, independent computer algebra systems
like Maple or Mathematica.  These are some of the gotchas and pitfalls
that you may encounter when using SymPy.  See also the `FAQ
<https://github.com/sympy/sympy/wiki/Faq>`_, the :ref:`Tutorial<tutorial>`, the
remainder of the SymPy Docs, and the `official Python Tutorial <https://docs.python.org/3/tutorial/>`_.


If you are already familiar with C or Java, you might also want to look
at this `4 minute Python tutorial
<https://nerdparadise.com/programming/python4minutes/>`_.

Ignore ``#doctest: +SKIP`` in the examples.  That has to do with
internal testing of the examples.

.. _equals-signs:

Equals Signs (=)
================

Single Equals Sign
------------------

The equals sign (``=``) is the assignment operator, not equality.  If
you want to do :math:`x = y`, use ``Eq(x, y)`` for equality.
Alternatively, all expressions are assumed to equal zero, so you can
just subtract one side and use ``x - y``.

The proper use of the equals sign is to assign expressions to variables.

For example:

    >>> from sympy.abc import x, y
    >>> a = x - y
    >>> print(a)
    x - y

Double Equals Signs
-------------------

Double equals signs (``==``) are used to test equality.  However, this
tests expressions exactly, not symbolically.  For example:

    >>> (x + 1)**2 == x**2 + 2*x + 1
    False
    >>> (x + 1)**2 == (x + 1)**2
    True

If you want to test for symbolic equality, one way is to subtract one
expression from the other and run it through functions like
:func:`~.expand`, :func:`~.simplify`, and :func:`~.trigsimp` and see if the
equation reduces to 0.

    >>> from sympy import simplify, cos, sin, expand
    >>> simplify((x + 1)**2 - (x**2 + 2*x + 1))
    0
    >>> eq = sin(2*x) - 2*sin(x)*cos(x)
    >>> simplify(eq)
    0
    >>> expand(eq, trig=True)
    0

.. note::

    See also `Why does SymPy say that two equal expressions are unequal?
    <https://github.com/sympy/sympy/wiki/Faq>`_ in the FAQ.


Variables
=========

Variables Assignment does not Create a Relation Between Expressions
-------------------------------------------------------------------

When you use ``=`` to do assignment, remember that in Python, as in most
programming languages, the variable does not change if you change the
value you assigned to it.  The equations you are typing use the values
present at the time of creation to "fill in" values, just like regular
Python definitions. They are not altered by changes made afterwards.
Consider the following:

    >>> from sympy import Symbol
    >>> a = Symbol('a')  # Symbol, `a`, stored as variable "a"
    >>> b = a + 1        # an expression involving `a` stored as variable "b"
    >>> print(b)
    a + 1
    >>> a = 4            # "a" now points to literal integer 4, not Symbol('a')
    >>> print(a)
    4
    >>> print(b)          # "b" is still pointing at the expression involving `a`
    a + 1

Changing quantity ``a`` does not change ``b``; you are not working
with a set of simultaneous equations. It might be helpful to remember
that the string that gets printed when you print a variable referring to
a SymPy object is the string that was given to it when it was created;
that string does not have to be the same as the variable that you assign
it to.

    >>> from sympy import var
    >>> r, t, d = var('rate time short_life')
    >>> d = r*t
    >>> print(d)
    rate*time
    >>> r = 80
    >>> t = 2
    >>> print(d)        # We haven't changed d, only r and t
    rate*time
    >>> d = r*t
    >>> print(d)        # Now d is using the current values of r and t
    160


If you need variables that have dependence on each other, you can define
functions.  Use the ``def`` operator.  Indent the body of the function.
See the Python docs for more information on defining functions.

    >>> c, d = var('c d')
    >>> print(c)
    c
    >>> print(d)
    d
    >>> def ctimesd():
    ...     """
    ...     This function returns whatever c is times whatever d is.
    ...     """
    ...     return c*d
    ...
    >>> ctimesd()
    c*d
    >>> c = 2
    >>> print(c)
    2
    >>> ctimesd()
    2*d


If you define a circular relationship, you will get a
``RuntimeError``.

    >>> def a():
    ...     return b()
    ...
    >>> def b():
    ...     return a()
    ...
    >>> a() #doctest: +SKIP
    Traceback (most recent call last):
      File "...", line ..., in ...
        compileflags, 1) in test.globs
      File "<...>", line 1, in <module>
        a()
      File "<...>", line 2, in a
        return b()
      File "<...>", line 2, in b
        return a()
      File "<...>", line 2, in a
        return b()
    ...
    RuntimeError: maximum recursion depth exceeded


.. note::
    See also `Why doesn't changing one variable change another that depends on it?
    <https://github.com/sympy/sympy/wiki/Faq>`_ in the FAQ.

.. _symbols:

Symbols
-------

Symbols are variables, and like all other variables, they need to be
assigned before you can use them.  For example:

    >>> import sympy
    >>> z**2  # z is not defined yet #doctest: +SKIP
    Traceback (most recent call last):
      File "<stdin>", line 1, in <module>
    NameError: name 'z' is not defined
    >>> sympy.var('z')  # This is the easiest way to define z as a standard symbol
    z
    >>> z**2
    z**2


If you use :command:`isympy`, it runs the following commands for you,
giving you some default Symbols and Functions.

    >>> from __future__ import division
    >>> from sympy import *
    >>> x, y, z, t = symbols('x y z t')
    >>> k, m, n = symbols('k m n', integer=True)
    >>> f, g, h = symbols('f g h', cls=Function)

You can also import common symbol names from :mod:`sympy.abc`.

    >>> from sympy.abc import w
    >>> w
    w
    >>> import sympy
    >>> dir(sympy.abc)  #doctest: +SKIP
    ['A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O',
    'P', 'Q', 'R', 'S', 'Symbol', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z',
    '__builtins__', '__doc__', '__file__', '__name__', '__package__', '_greek',
    '_latin', 'a', 'alpha', 'b', 'beta', 'c', 'chi', 'd', 'delta', 'e',
    'epsilon', 'eta', 'f', 'g', 'gamma', 'h', 'i', 'iota', 'j', 'k', 'kappa',
    'l', 'm', 'mu', 'n', 'nu', 'o', 'omega', 'omicron', 'p', 'phi', 'pi',
    'psi', 'q', 'r', 'rho', 's', 'sigma', 't', 'tau', 'theta', 'u', 'upsilon',
    'v', 'w', 'x', 'xi', 'y', 'z', 'zeta']

If you want control over the assumptions of the variables, use
:class:`~.Symbol` and :func:`~.symbols`.  See :ref:`Keyword
Arguments<keyword-arguments>` below.

Lastly, it is recommended that you not use :obj:`I
<sympy.core.numbers.ImaginaryUnit>`, :obj:`~.E`, :obj:`~.S`, :obj:`N
<sympy.core.evalf.N>`, ``C``, :obj:`O <sympy.series.order.Order>`, or :obj:`Q
<sympy.assumptions.ask.AssumptionKeys>` for variable or symbol names, as those
are used for the imaginary unit (:math:`i`), the base of the natural logarithm
(:math:`e`), the :func:`~.sympify` function (see :ref:`Symbolic
Expressions<symbolic-expressions>` below), numeric evaluation (:func:`~.N` is
equivalent to :ref:`evalf()<evalf-label>` ), the `big O
<https://en.wikipedia.org/wiki/Big_O_notation>`_ order symbol (as in
:math:`O(n\log{n})`), and the assumptions object that holds a list of
supported ask keys (such as ``Q.real``), respectively. You can use the
mnemonic ``OSINEQ`` to remember what Symbols are defined by default in SymPy.
Or better yet, always use lowercase letters for Symbol names. Python will not
prevent you from overriding default SymPy names or functions, so be careful.

    >>> cos(pi)  # cos and pi are a built-in sympy names.
    -1
    >>> pi = 3   # Notice that there is no warning for overriding pi.
    >>> cos(pi)
    cos(3)
    >>> def cos(x):  # No warning for overriding built-in functions either.
    ...     return 5*x
    ...
    >>> cos(pi)
    15
    >>> from sympy import cos  # reimport to restore normal behavior


To get a full list of all default names in SymPy do:

    >>> import sympy
    >>> dir(sympy)  #doctest: +SKIP
    # A big list of all default sympy names and functions follows.
    # Ignore everything that starts and ends with __.

If you have `IPython <https://ipython.org/>`_ installed and
use :command:`isympy`, you can also press the TAB key to get a list of
all built-in names and to autocomplete.  Also, see `this page
<https://kogs-www.informatik.uni-hamburg.de/~meine/python_tricks>`_ for a
trick for getting tab completion in the regular Python console.

.. note::
    See also `What is the best way to create symbols?
    <https://github.com/sympy/sympy/wiki/Faq>`_ in the FAQ.

.. _calling-functions:

Functions
---------

A function like ``f(x)`` can be created by defining the Function
and the variable:

    >>> from sympy import Function
    >>> f = Function('f')
    >>> x = Symbol('x')
    >>> f(x)
    f(x)

If you assign ``f(x)`` to a Python variable `f` you will lose your
ability to copy and paste that function or to create a function
with a different argument: ``Function('f')`` is callable, but
``Function('f')(x)`` is not:

    >>> f1 = Function('f1')
    >>> f2 = Function('f2')('x')
    >>> f1
    f1
    >>> f2
    f2(x)
    >>> f1(1)
    f1(1)
    >>> f2(1)
    Traceback (most recent call last):
    ...
    TypeError: 'f2' object is not callable
    >>> f2.subs(x, 1)
    f2(1)

.. _symbolic-expressions:

Symbolic Expressions
====================

.. _python-vs-sympy-numbers:

Python numbers vs. SymPy Numbers
--------------------------------

SymPy uses its own classes for integers, rational numbers, and floating
point numbers instead of the default Python ``int`` and ``float``
types because it allows for more control.  But you have to be careful.
If you type an expression that just has numbers in it, it will default
to a Python expression.  Use the :func:`~.sympify` function, or just
:obj:`~.S`, to ensure that something is a SymPy expression.

    >>> 6.2  # Python float. Notice the floating point accuracy problems.
    6.2000000000000002
    >>> type(6.2)  # <type 'float'> in Python 2.x,  <class 'float'> in Py3k
    <... 'float'>
    >>> S(6.2)  # SymPy Float has no such problems because of arbitrary precision.
    6.20000000000000
    >>> type(S(6.2))
    <class 'sympy.core.numbers.Float'>

If you include numbers in a SymPy expression, they will be sympified
automatically, but there is one gotcha you should be aware of.  If you
do ``<number>/<number>`` inside of a SymPy expression, Python will
evaluate the two numbers before SymPy has a chance to get
to them.  The solution is to :func:`~.sympify` one of the numbers, or use
:obj:`~.Rational`.

    >>> x**(1/2)  # evaluates to x**0 or x**0.5
    x**0.5
    >>> x**(S(1)/2)  # sympyify one of the ints
    sqrt(x)
    >>> x**Rational(1, 2)  # use the Rational class
    sqrt(x)

With a power of ``1/2`` you can also use ``sqrt`` shorthand:

    >>> sqrt(x) == x**Rational(1, 2)
    True

If the two integers are not directly separated by a division sign then
you don't have to worry about this problem:

    >>> x**(2*x/3)
    x**(2*x/3)

.. note::

    A common mistake is copying an expression that is printed and
    reusing it.  If the expression has a :obj:`~.Rational` (i.e.,
    ``<number>/<number>``) in it, you will not get the same result,
    obtaining the Python result for the division rather than a SymPy
    Rational.

    >>> x = Symbol('x')
    >>> print(solve(7*x -22, x))
    [22/7]
    >>> 22/7  # If we just copy and paste we get int 3 or a float
    3.142857142857143
    >>> # One solution is to just assign the expression to a variable
    >>> # if we need to use it again.
    >>> a = solve(7*x - 22, x)[0]
    >>> a
    22/7

    The other solution is to put quotes around the expression
    and run it through S() (i.e., sympify it):

    >>> S("22/7")
    22/7

Also, if you do not use :command:`isympy`, you could use ``from
__future__ import division`` to prevent the ``/`` sign from performing
`integer division <https://en.wikipedia.org/wiki/Integer_division>`_.

    >>> from __future__ import division
    >>> 1/2   # With division imported it evaluates to a python float
    0.5
    >>> 1//2  # You can still achieve integer division with //
    0

    But be careful: you will now receive floats where you might have desired
    a Rational:

    >>> x**(1/2)
    x**0.5

:obj:`~.Rational` only works for number/number and is only meant for
rational numbers.  If you want a fraction with symbols or expressions in
it, just use ``/``.  If you do number/expression or expression/number,
then the number will automatically be converted into a SymPy Number.
You only need to be careful with number/number.

    >>> Rational(2, x)
    Traceback (most recent call last):
    ...
    TypeError: invalid input: x
    >>> 2/x
    2/x

Evaluating Expressions with Floats and Rationals
------------------------------------------------

SymPy keeps track of the precision of ``Float`` objects. The default precision is
15 digits. When an expression involving a ``Float`` is evaluated, the result
will be expressed to 15 digits of precision but those digits (depending
on the numbers involved with the calculation) may not all be significant.

The first issue to keep in mind is how the ``Float`` is created: it is created
with a value and a precision. The precision indicates how precise of a value
to use when that ``Float`` (or an expression it appears in) is evaluated.

The values can be given as strings, integers, floats, or rationals.

    - strings and integers are interpreted as exact

    >>> Float(100)
    100.000000000000
    >>> Float('100', 5)
    100.00

    - to have the precision match the number of digits, the null string
      can be used for the precision

    >>> Float(100, '')
    100.
    >>> Float('12.34')
    12.3400000000000
    >>> Float('12.34', '')
    12.34

    >>> s, r = [Float(j, 3) for j in ('0.25', Rational(1, 7))]
    >>> for f in [s, r]:
    ...     print(f)
    0.250
    0.143

Next, notice that each of those values looks correct to 3 digits. But if we try
to evaluate them to 20 digits, a difference will become apparent:

    The 0.25 (with precision of 3) represents a number that has a non-repeating
    binary decimal; 1/7 is repeating in binary and decimal -- it cannot be
    represented accurately too far past those first 3 digits (the correct
    decimal is a repeating 142857):

    >>> s.n(20)
    0.25000000000000000000
    >>> r.n(20)
    0.14285278320312500000

    It is important to realize that although a Float is being displayed in
    decimal at arbitrary precision, it is actually stored in binary. Once the
    Float is created, its binary information is set at the given precision.
    The accuracy of that value cannot be subsequently changed; so 1/7, at a
    precision of 3 digits, can be padded with binary zeros, but these will
    not make it a more accurate value of 1/7.

If inexact, low-precision numbers are involved in a calculation with
higher precision values, the evalf engine will increase the precision
of the low precision values and inexact results will be obtained. This is
feature of calculations with limited precision:

    >>> Float('0.1', 10) + Float('0.1', 3)
    0.2000061035

Although the ``evalf`` engine tried to maintain 10 digits of precision (since
that was the highest precision represented) the 3-digit precision used
limits the accuracy to about 4 digits -- not all the digits you see
are significant. evalf doesn't try to keep track of the number of
significant digits.

That very simple expression involving the addition of two numbers with
different precisions will hopefully be instructive in helping you
understand why more complicated expressions (like trig expressions that
may not be simplified) will not evaluate to an exact zero even though,
with the right simplification, they should be zero. Consider this
unsimplified trig identity, multiplied by a big number:

    >>> big = 12345678901234567890
    >>> big_trig_identity = big*cos(x)**2 + big*sin(x)**2 - big*1
    >>> abs(big_trig_identity.subs(x, .1).n(2)) > 1000
    True

When the `\cos` and `\sin` terms were evaluated to 15 digits of precision and
multiplied by the big number, they gave a large number that was only
precise to 15 digits (approximately) and when the 20 digit big number
was subtracted the result was not zero.

There are three things that will help you obtain more precise numerical
values for expressions:

    1) Pass the desired substitutions with the call to evaluate. By doing
    the subs first, the ``Float`` values cannot be updated as necessary. By
    passing the desired substitutions with the call to evalf the ability
    to re-evaluate as necessary is gained and the results are impressively
    better:

    >>> big_trig_identity.n(2, {x: 0.1})
    -0.e-91

    2) Use Rationals, not Floats. During the evaluation process, the
    Rational can be computed to an arbitrary precision while the Float,
    once created -- at a default of 15 digits -- cannot. Compare the
    value of ``-1.4e+3`` above with the nearly zero value obtained when
    replacing x with a Rational representing 1/10 -- before the call
    to evaluate:

    >>> big_trig_identity.subs(x, S('1/10')).n(2)
    0.e-91

    3) Try to simplify the expression. In this case, SymPy will recognize
    the trig identity and simplify it to zero so you don't even have to
    evaluate it numerically:

    >>> big_trig_identity.simplify()
    0


.. _Immutability-of-Expressions:

Immutability of Expressions
---------------------------

Expressions in SymPy are immutable, and cannot be modified by an in-place
operation.  This means that a function will always return an object, and the
original expression will not be modified. The following example snippet
demonstrates how this works::

    def main():
        var('x y a b')
        expr = 3*x + 4*y
        print('original =', expr)
        expr_modified = expr.subs({x: a, y: b})
        print('modified =', expr_modified)

    if __name__ == "__main__":
        main()

The output shows that the :obj:`~sympy.core.basic.Basic.subs()` function has replaced variable
``x`` with variable ``a``, and variable ``y`` with variable ``b``::

    original = 3*x + 4*y
    modified = 3*a + 4*b

The :obj:`~sympy.core.basic.Basic.subs()` function does not modify the original expression ``expr``.
Rather, a modified copy of the expression is returned. This returned object
is stored in the variable ``expr_modified``. Note that unlike C/C++ and
other high-level languages, Python does not require you to declare a variable
before it is used.


Mathematical Operators
----------------------

SymPy uses the same default operators as Python.  Most of these, like
``*/+-``, are standard.  Aside from integer division discussed in
:ref:`Python numbers vs. SymPy Numbers <python-vs-sympy-numbers>` above,
you should also be aware that implied multiplication is not allowed. You
need to use ``*`` whenever you wish to multiply something.  Also, to
raise something to a power, use ``**``, not ``^`` as many computer
algebra systems use.  Parentheses ``()`` change operator precedence as
you would normally expect.

In :command:`isympy`, with the :command:`ipython` shell::

    >>> 2x
    Traceback (most recent call last):
    ...
    SyntaxError: invalid syntax
    >>> 2*x
    2*x
    >>> (x + 1)^2  # This is not power.  Use ** instead.
    Traceback (most recent call last):
    ...
    TypeError: unsupported operand type(s) for ^: 'Add' and 'int'
    >>> (x + 1)**2
    (x + 1)**2
    >>> pprint(3 - x**(2*x)/(x + 1))
        2*x
       x
    - ----- + 3
      x + 1


Inverse Trig Functions
----------------------

SymPy uses different names for some functions than most computer algebra
systems.  In particular, the inverse trig functions use the python names
of :obj:`~.asin`, :obj:`~.acos` and so on instead of the usual ``arcsin``
and ``arccos``.  Use the methods described in :ref:`Symbols <symbols>`
above to see the names of all SymPy functions.

Sqrt is not a Function
----------------------

There is no ``sqrt`` function in the same way that there is an
exponential function (``exp``). ``sqrt(x)`` is used to represent
``Pow(x, S(1)/2)`` so if you want to know if an expression has any
square roots in it, ``expr.has(sqrt)`` will not work. You must look
for ``Pow`` with an exponent of one half (or negative one half if it
is in a denominator, e.g.

    >>> (y + sqrt(x)).find(Wild('w')**S.Half)
    {sqrt(x)}
    >>> (y + 1/sqrt(x)).find(Wild('w')**-S.Half)
    {1/sqrt(x)}

If you are interested in any power of the ``sqrt`` then the
following pattern would be appropriate

    >>> sq = lambda s: s.is_Pow and s.exp.is_Rational and s.exp.q == 2
    >>> (y + sqrt(x)**3).find(sq)
    {x**(3/2)}

Special Symbols
===============

The symbols ``[]``, ``{}``, ``=``, and ``()`` have special meanings in
Python, and thus in SymPy.  See the Python docs linked to above for
additional information.

.. _lists:

Lists
-----

Square brackets ``[]`` denote a list.  A list is a container that holds
any number of different objects.  A list can contain anything, including
items of different types.  Lists are mutable, which means that you can
change the elements of a list after it has been created.  You access the
items of a list also using square brackets, placing them after the list
or list variable.  Items are numbered using the space before the item.

.. note::

    List indexes begin at 0.

Example:

    >>> a = [x, 1]  # A simple list of two items
    >>> a
    [x, 1]
    >>> a[0]  # This is the first item
    x
    >>> a[0] = 2  # You can change values of lists after they have been created
    >>> print(a)
    [2, 1]
    >>> print(solve(x**2 + 2*x - 1, x)) # Some functions return lists
    [-1 + sqrt(2), -sqrt(2) - 1]


.. note::
    See the Python docs for more information on lists and the square
    bracket notation for accessing elements of a list.

Dictionaries
------------

Curly brackets ``{}`` denote a dictionary, or a dict for short.  A
dictionary is an unordered list of non-duplicate keys and values.  The
syntax is ``{key: value}``.  You can access values of keys using square
bracket notation.

    >>> d = {'a': 1, 'b': 2}  # A dictionary.
    >>> d
    {'a': 1, 'b': 2}
    >>> d['a']  # How to access items in a dict
    1
    >>> roots((x - 1)**2*(x - 2), x)  # Some functions return dicts
    {1: 2, 2: 1}
    >>> # Some SymPy functions return dictionaries.  For example,
    >>> # roots returns a dictionary of root:multiplicity items.
    >>> roots((x - 5)**2*(x + 3), x)
    {-3: 1, 5: 2}
    >>> # This means that the root -3 occurs once and the root 5 occurs twice.

.. note::

    See the Python docs for more information on dictionaries.

Tuples
------

Parentheses ``()``, aside from changing operator precedence and their
use in function calls, (like ``cos(x)``), are also used for tuples.  A
``tuple`` is identical to a :ref:`list <lists>`, except that it is not
mutable.  That means that you cannot change their values after they
have been created.  In general, you will not need tuples in SymPy, but
sometimes it can be more convenient to type parentheses instead of
square brackets.

    >>> t = (1, 2, x)  # Tuples are like lists
    >>> t
    (1, 2, x)
    >>> t[0]
    1
    >>> t[0] = 4  # Except you cannot change them after they have been created
    Traceback (most recent call last):
      File "<console>", line 1, in <module>
    TypeError: 'tuple' object does not support item assignment

    Single element tuples, unlike lists, must have a comma in them:

    >>> (x,)
    (x,)

    Without the comma, a single expression without a comma is not a tuple:

    >>> (x)
    x

    integrate takes a sequence as the second argument if you want to integrate
    with limits (and a tuple or list will work):

    >>> integrate(x**2, (x, 0, 1))
    1/3
    >>> integrate(x**2, [x, 0, 1])
    1/3


.. note::

    See the Python docs for more information on tuples.

.. _keyword-arguments:

Keyword Arguments
-----------------

Aside from the usage described :ref:`above <equals-signs>`, equals signs
(``=``) are also used to give named arguments to functions.  Any
function that has ``key=value`` in its parameters list (see below on how
to find this out), then ``key`` is set to ``value`` by default.  You can
change the value of the key by supplying your own value using the equals
sign in the function call.  Also, functions that have ``**`` followed by
a name in the parameters list (usually ``**kwargs`` or
``**assumptions``) allow you to add any number of ``key=value`` pairs
that you want, and they will all be evaluated according to the function.

    ``sqrt(x**2)`` doesn't auto simplify to x because x is assumed to be
    complex by default, and, for example, ``sqrt((-1)**2) == sqrt(1) == 1 != -1``:

    >>> sqrt(x**2)
    sqrt(x**2)

    Giving assumptions to Symbols is an example of using the keyword argument:

    >>> x = Symbol('x', positive=True)

    The square root will now simplify since it knows that ``x >= 0``:

    >>> sqrt(x**2)
    x

    powsimp has a default argument of ``combine='all'``:

    >>> pprint(powsimp(x**n*x**m*y**n*y**m))
         m + n
    (x*y)

    Setting combine to the default value is the same as not setting it.

    >>> pprint(powsimp(x**n*x**m*y**n*y**m, combine='all'))
         m + n
    (x*y)

    The non-default options are ``'exp'``, which combines exponents...

    >>> pprint(powsimp(x**n*x**m*y**n*y**m, combine='exp'))
     m + n  m + n
    x     *y

    ...and 'base', which combines bases.

    >>> pprint(powsimp(x**n*x**m*y**n*y**m, combine='base'))
         m      n
    (x*y) *(x*y)

.. note::

    See the Python docs for more information on function parameters.

Getting help from within SymPy
==============================

help()
------

Although all docs are available at `docs.sympy.org <https://docs.sympy.org/>`_ or on the
`SymPy Wiki <https://wiki.sympy.org/>`_, you can also get info on functions from within the
Python interpreter that runs SymPy.  The easiest way to do this is to do
``help(function)``, or ``function?`` if you are using :command:`ipython`::

    In [1]: help(powsimp)  # help() works everywhere

    In [2]: # But in ipython, you can also use ?, which is better because it
    In [3]: # it gives you more information
    In [4]: powsimp?

These will give you the function parameters and docstring for
:func:`~.powsimp`.  The output will look something like this:

.. module:: sympy.simplify.simplify
.. autofunction:: powsimp
   :noindex:

source()
--------

Another useful option is the :func:`~.source` function.  This will print
the source code of a function, including any docstring that it may have.
You can also do ``function??`` in :command:`ipython`.  For example,
from SymPy 0.6.5:

    >>> source(simplify)  # simplify() is actually only 2 lines of code. #doctest: +SKIP
    In file: ./sympy/simplify/simplify.py
    def simplify(expr):
        """Naively simplifies the given expression.
           ...
           Simplification is not a well defined term and the exact strategies
           this function tries can change in the future versions of SymPy. If
           your algorithm relies on "simplification" (whatever it is), try to
           determine what you need exactly  -  is it powsimp()? radsimp()?
           together()?, logcombine()?, or something else? And use this particular
           function directly, because those are well defined and thus your algorithm
           will be robust.
           ...
        """
        expr = Poly.cancel(powsimp(expr))
        return powsimp(together(expr.expand()), combine='exp', deep=True)